Disc Brake 10" G5 Stainless Steel Kit

SKU: 20390


About this Product

This kit by Tie Down Engineering comes with all components necessary to outfit one wheel with a disc brake system.
Kit includes single piston aluminum caliper, patented bi-metal aluminum/ stainless piston, oil impregnated bronze bushings, ceramic pads with stainless steel backing plates, stainless steel slider pins, bearings and seals, galvanized mounting bracket and complete installation instructions.
Tie Down disc brakes cannot be used with any electric-over-hydraulic actuators that produce more than 1,000 PSI.
Product Specifications:
Rotor Diameter: 9.6"
Inner Bearing: 68149 (1 3/8")
Outer Bearing: 44646 (1 1/16")
Seal Inner Diameter: 1.72"
Caliper: 46910
Mounting Bracket: 44687
Axle Rating: 3,500 lbs.
Bolt Pattern: 5 on 4 1/2"
Wheel Size: *13" and up
Usable Stud Length: 1.32"

*Will not be accepted on 13" aluminum rims and some 14" aluminum rims

NOTE: Pads must be replaced when 3/32" (.094") or less of the pad friction material is left.

Categories: ,